If you are a fan of shotguns, you must have come across the Stevens 320 shotgun. This shotgun is known for its affordability, durability, and reliability, making it a favorite among hunters and shooters. However, like any other firearm, the Stevens 320 shotgun can experience problems that affect its performance.
What are the common problems with the Stevens 320 shotgun?
One of the common problems with the Stevens 320 shotgun is failure to eject. This occurs when the spent casing fails to exit the chamber after firing. It can be caused by several factors, including dirty or worn-out ejectors, weak springs, or damaged extractor.
Another problem is feeding issues, where the shotgun fails to load a new round into the chamber after firing. This can be caused by a dirty or damaged magazine tube, weak magazine spring, or a damaged follower.
Stevens 320 shotgun users have also reported trigger issues, where the trigger does not reset after firing or feels mushy. This can be caused by worn-out trigger components or poor trigger adjustment.
Other problems that users have reported include loose stocks, sticky action, and jamming. These can be caused by poor maintenance, improper storage, or faulty components.
How to fix common Stevens 320 shotgun problems
The good news is that most of the common problems with the Stevens 320 shotgun can be fixed easily with some basic gunsmithing skills and tools. Here are some solutions to the common issues:
Failure to eject
To fix failure to eject, first, ensure that the shotgun is clean and well-lubricated. Check the ejectors for dirt, debris, or wear and clean or replace them as necessary. Check the extractor for damage or wear, and replace if necessary. If the issue persists, inspect the shotgun’s chamber for rough spots or burrs and polish them out using a chamber brush or sandpaper.
Feeding issues
To fix feeding issues, first, ensure that the magazine tube, magazine spring, and follower are clean and free of debris. Verify that the shotgun is loaded with the correct ammunition and that the rounds are properly seated in the magazine. If the issue persists, inspect the magazine tube for damage or wear and replace as necessary.
Trigger issues
To fix trigger issues, first, ensure that the trigger components are clean and free of debris. Inspect the trigger adjustment and adjust it as necessary to ensure proper trigger reset. If the issue persists, replace the worn-out trigger components.
Loose stocks
To fix loose stocks, first, ensure that the stock screws are tight and properly torqued. If the issue persists, remove the stock and apply a drop of thread locker to the screw threads to prevent them from loosening. If the stock is damaged, replace it with a new one.
Sticky action
To fix sticky action, first, ensure that the shotgun is clean and well-lubricated. Check the action bars, slide assembly, and receiver for dirt, debris, or wear and clean or replace them as necessary. If the issue persists, inspect the shotgun’s chamber for rough spots or burrs and polish them out using a chamber brush or sandpaper.
Jamming
To fix jamming, first, ensure that the shotgun is clean and well-lubricated. Check the magazine tube, magazine spring, and follower for damage, wear, or debris and clean or replace them as necessary. Verify that the shotgun is loaded with the correct ammunition and that the rounds are properly seated in the magazine. If the issue persists, inspect the shotgun’s chamber for rough spots or burrs and polish them out using a chamber brush or sandpaper.
Conclusion
The Stevens 320 shotgun is an excellent firearm known for its affordability, durability, and reliability. However, like any other shotgun, it can experience problems that affect its performance. By understanding the common problems and their solutions, you can keep your Stevens 320 shotgun in top condition and enjoy its performance for years to come.